Conference Abstracts

All Abstracts were presented at the Groundwater Conferences

Displaying 1 - 50 of 795 results
Title Presenter Name Presenter Surname Area Sort descending Conference year Keywords

Abstract

Degradation of chloroethene in groundwater primarily occurs via microbially-mediated reductive dechlorination (RD). Anaerobic organohalide-respiring bacteria (OHRB) use chloroethenes as electron acceptors to gain energy. They produce reductive dehalogenase enzymes (RDases) to perform this function by transcription of functional genes into mRNA and translation to proteins (metabolic regulation). However, how hydrodynamics and hydrogeochemistry control the metabolic efficiency of OHRB in biodegrading chloroethene is essential for effective bioremediation design yet an under-investigated topic. For this reason, we implemented a virtual experiment (1D reactive transport model) to investigate the effects of site conditions on transcription-translation and, hence, biodegradation processes within chloroethene plumes. In the model, RD was simulated using Enzyme-Based Kinetics, explicitly mimicking the production of RDases via metabolic regulation, calibrated on microcosm experimental data gained from literature. Features of an actual contaminated site (Grindsted, Denmark) were then used to set up the virtual experiment. Here, chloroethene leaked from a former pharmaceutical factory migrates through a sandy aquifer and gets discharged into the Grindsted stream. Preliminary results show that substrate (electron donors) limiting conditions caused by competing electron acceptors and dispersion and high flow rates represent the key factors controlling biodegradation via RDase production.

Abstract

Three dimensional numerical flow modelling has become one of the best tools to optimise and management wellfields across the world. This paper presents a case study of simulating an existing wellfield in an alluvial aquifer directly recharged by a major perennial river with fluctuating head stages. The wellfield was originally commissioned in 2010 to provide a supply of water to a nearby Mine. Ten large diameter boreholes capable of abstracting ±2 000 m3 /hour were initially installed in the wellfield. The numerical groundwater flow model was used to evaluate if an additional 500 m3 /hour could be sustainably abstract from the alluvial aquifer system. A probabilistic river flow assessment and surface water balance model was used to quantify low and average flow volumes for the river and used to determine water availability in the alluvial aquifer over time. Output generated indicated that the wellfield demand only exceeded the lowest 2% (98th percentile) of measured monthly river flow over a 59 year period, thereby proving sufficient water availability. Conceptual characterisation of the alluvial aquifer was based on previous feasibility studies and monitoring data from the existing hydrogeological system. Aquifer parameters was translated into the model discretisation grid based on the conceptual site model while the MODFLOW River package was used to represent the river. Actual river stage data was used in the calibration process in addition to water levels of monitoring boreholes and pump tests results. The input of fluctuating river water levels proved essential in obtaining a low model error (RMSE of 0.3). Scenario modelling was used to assess the assurance of supply of the alluvial aquifer for average and drought conditions with a high confidence and provided input into further engineering designs. Wellfield performance and cumulative drawdown were also assessed for the scenario with the projected additional yield demand. Scenario modelling was furthermore used to optimise the placement of new boreholes in the available wellfield concession area.

Abstract

For the Department of Water and Sanitation (DWS) to better leverage the wealth of information being collected by various “silo” operational source water information systems, a high-priority initiative was launched to establish a National Integrated Water Information System (NIWIS), which currently consists of over 40 web-accessible dashboards including groundwater related dashboards mostly accessible to the public. Dispersed and disintegrated data and information stored in different sources and formats would hinder decision support in the water sector and deter improvement in service delivery by the DWS. The DWS undertook an extensive and rigorous business requirements analysis exercise within the DWS to ensure that the proposed system does not become a white elephant and facilitate the prioritization of system deliverables. A prototype (waterfall) approach was adopted to develop the NIWIS to ensure the development was still within the suggested business requirements. NIWIS has enabled mostly DWS managers to establish one trusted source of decision-making information for timeous, effective and efficient responses to service delivery. The number of NIWIS dashboards continues to grow as improved data-related business processes are adopted. The unavailability of reliable data from DWS data sources and the exclusion of business requirements from organizations external to DWS were identified as the main challenges to NIWIS disseminating comprehensive, credible information. Therefore, this paper aims to provide some details of the geohydrological information that NIWIS provides and seek feedback from this International Hydrogeologists community for further development of NIWIS.

Abstract

The advent of the 'Big Data' age has fast tracked advances in automated data analytics, with significant breakthroughs in the application of artificial intelligence (AI). Machine learning (ML), a branch of AI, brings together statistics and computer science, enabling computers to learn how to complete given tasks without the need for explicit programming. ML algorithms learn to recognize and describe complex patterns and relationships in data - making them useful tools for prediction and data-driven discovery. The fields of environmental sciences, water resources and geosciences have seen a proliferation of the use of AI and ML techniques. Yet, despite practical and commercial successes, ML remains a niche field with many under-explored research opportunities in the hydrogeological sciences. Currently physical-process based models are widely applied for groundwater research and management, being the dominant tool for describing and understanding processes governing groundwater flow and transport. However, they are limited in terms of the high data requirements, costly development and run time. By comparison, ML algorithms are data-driven models that establish relationships between an input (e.g. climate data) and an output (e.g. groundwater level) without the need to understand the underlying physical process, making them most suitable for cases in which data is plentiful but the underlying processes are poorly understood. Combining data-driven and process-based models can provide opportunities to compensate for the limitations of each of these methodologies. We present applications of ML algorithms as knowledge discovery tools and explore the potential and limitations of ML to fill in data gaps and forecast groundwater levels based on climate data and predictions. Results represent the first step in on-going work applying ML as an additional tool in the study and management of groundwater resources, alongside and enhancing conventional techniques such as numerical modelling.

Abstract

Gold Mining activities the past 60 years at AngloGold Ashanti polluted the groundwater underlain by 4000 ha of land at the Vaal River and West Wits operations in South Africa. Sulphide material in Tailings Storage Facilities, Waste Rock Dumps and extraction plants produce Saline Mine Drainage with Sulphate, minor salts and metals that seep to the groundwater and ultimately into surface water resources. Water regulation requires mines to prevent, minimise/ reduce or eliminate pollution of water resources. The waste philosophy has matured from tolerate and transfer to treat and termination of pollution sources. The impact of the pollution was determined and possible technologies to treat the impact were evaluated. Source controls of proper water management by storm water management, clean dirty water separation, lined water conveyance structures and reduced deposition of water on waste facilities is crucial. The aquifer character determines the possible remediation technology. From the possible technologies phytoremediation, physical interception and re-use of this water was selected. In future possible treatment of the water would be considered. This paper explain the strategy and report on the phased implementation of these plans and the expected results. The establishment of 750 ha of woodlands as phytoremediation, interception trenches of 1250 m, 38 interception boreholes and infrastructure to re-use this water in 10 water management areas is planned. The total volume of 15 Ml/day would be abstracted for re-use from the boreholes and trenches. The woodlands can potentially attenuate and treat 5 ml/day. The established woodlands of 150 ha proof successful to intercept diffused seep over the area of establishment and reduce the water level and base flow. The 2 implemented trenches of 1000 m indicate a local decline in the water level with interception of shallow groundwater within 1-2 m from surface. The 2 production interception well fields abstracting 50 and 30 l/s respectively indicate a water level decline of between 2 to 14 m with regional cones of depression of a few hundred meters to intercept groundwater flow up to 20 meter. Predictions from groundwater modelling indicate that these schemes can minimise pollution during the operational phase and protect downstream water resources. Predictions from modelling indicate that the pollution sources need to be removed to ensure long term clean-up to return the land to save use. The gold and uranium prize is securing the removal of the sources through re-processing of the tailings and waste rock dumps. After removal of the sources of pollution the remediation schemes would have to be operated for 20 years to return the groundwater to an acceptable standard of stock watering and industrial water use. The water quality is observed by a monitoring network of approximately 100 observation boreholes.

Abstract

Globally, cumulative plastic production since 1950 is estimated to have reached 2500 Mt of plastic. It is estimated up 60% of this plastic is either resting in landfills or the natural environment, including groundwater settings. Microplastics are small pieces of plastic ranging between 1μm – 5mm in size and have been found in every ecosystem and environment on the planet. Much of the available literature on microplastics is focused on marine environments with few in comparison focused on freshwater environments, and even fewer on groundwater settings.

The aim of this study is therefore to investigate the attenuation process responsible for influencing microplastic transport in saturated sands. This research will adapt colloid transport theory and experiments to better understand the movement of microplastics through sandy media. Saturated aquifer conditions will be set up and simulated using modified Darcy column experiments adapted from Freeze & Cherry (1979). Modified microplastics will be injected into the columns as tracers and the effluent concentrations measured by Fourier-transform infrared spectroscopy (FTIR). Breakthrough curves will then be plotted using the effluent concentrations to determine the attachment efficiency (α). It is expected the attachment efficiency will vary by microplastic type and size range. The Ionic strength of the solution flowing through the column and the surface charges of both microplastics and sandy surfaces are likely to influence the degree of attenuation observed. The relationship between different types of microplastics and collector surfaces from a charge perspective and their influence on the degree of attenuation will be evaluated.

Given the lack of literature, its ubiquitous presence and postulated effects on human health, this research is significant. Through this research, the transport and attenuation of microplastics through sandy aquifers can be better understood, and in the process inform future research and water resource management.

Abstract

The hydraulic parameters of heterogeneous aquifers are often estimated by conducting pumping (and recovery) tests during which the drawdown in a borehole intersecting the aquifer is measured over time, and by interpreting the data after making a number of assumptions about the aquifer conditions. The interpreted values of the hydraulic parameters are then considered to be average values that represent the properties of the bulk aquifer without taking into account local heterogeneities and anisotropies. An alternative and more economic approach is to measure streaming potentials in the vicinity of the borehole being tested. The streaming potential method is a non-invasive geophysical method that measures electrical signals generated by groundwater flow in the subsurface through a process known as electrokinetic coupling. This method allows data to be recorded at a high spatial density around the borehole. The interpretation of streaming potential data in terms of aquifer hydraulic parameters is facilitated by a coupled flow relationship which links the streaming potential gradient to the hydraulic gradient through a constant of proportionality called the electrokinetic coupling coefficient. In the current study, field measurements of streaming potentials were taken during the pumping and recovery phases of pumping tests conducted at two sites with dissimilar geological and geohydrological conditions. The recorded streaming potential data were interpreted by calculating the hydraulic head gradient from the streaming potential gradient, and by using the potential field analytical solution for the transient mode, which relates the streaming potential field directly to the average hydraulic conductivity. Hydraulic conductivity values estimated from the streaming potential method were of the same order as values determined from the analysis of drawdown data, with a relative error of 0.2. This study demonstrates that the streaming potential method is a viable tool to compliment pumping tests and provide a spatial representation of the hydraulic parameters.

Abstract

Artificial Intelligence (AI) has been used in a variety of problems in the fields of science and engineering in particular automation of many processes due to their self-learning capabilities as well as their noise-immunity. In this paper, we describe a study of the applicability of one of the popular branch of AI (Artificial Neural Network (ANN)) as an alternative approach to automate modelling of one-dimensional geoelectrical resistivity sounding data. The methodology involves two ANNs; first one for curve type identification and the other one for model parameter estimation. A three-layer feedforward neural network that was trained from geoelectrical resistivity data taken at boreholes with geology logs was used to predict earth models from measured data without the need to guess the initial model parameters or use synthetic data as is done with most conventional inversion approaches. The motivation for using the ANN for geophysical inversion is that they are adaptive systems that perform a non-linear mapping between two sets of data from a given domain. For network training, we use the back-propagation algorithm. An example using data from southern Malawi shows that the ANN results outperforms the conventional approaches as the results after adequate training, produce reasonably accurate earth models which are in agreement with borehole log data.

Abstract

It is estimated that the three coal layers in the Springbok Flats contain about 5 TCF of coal bed methane (CBM). Two sedimentary basins, namely the southern Tuinplaas basin and the northern Roedtan basin, exist with coal layers with a total thickness of 7m which occurs mainly in three mayor seams. The coal layers are located between 20 m to more than 600m.
Farmers in the Flats are concerned about the environmental impact of fracking the coal beds. They are mostly worried about the risk of groundwater pollution; the drawdown of the water table and the producing of a bad quality water during the mining process. They set up an EPA for the Springbok Flats in 2010 and until now, they have stopped more than 6 companies to conducted exploration (stopped strictly on account of the different laws in SA that were not adhered too).
On average, 1000 liters of water is produced for every 2000 cubic feet coal bed methane mined in the USA. The quality of the produced water is not good (with typical Na values of more than 5 000 mg/l) and cannot be used for irrigation purposes.
It is thus expected that about 500 million m3 of bad quality water will be produced for every 1 TCF mined in the Flats. This groundwater will be removed from the system and it is expected that a drawdown of up to 30m will be evident at places in the Springbok Flats. There are also a large number of dykes and faults in the Flats which imply that the upward movement of methane and water will be very probable after abandonment of each coal methane well.

Abstract

A standard methodology for establishing a groundwater baseline for unconventional gas projects in South Africa did not exist at the time the current study was undertaken. The study was therefore aimed at filling this gap, specifically focusing on hydraulic fracturing and underground coal gasification (UCG) operations.

An extensive literature review was conducted to establish the baseline methodology. The latest literature on hydraulic fracturing and UCG was reviewed to determine how these activities may potentially impact on the groundwater environment. The literature review further examined the role that geological structures, such as dolerite intrusives, may be play in the migration of contaminants associated with unconventional gas projects. The literature review then focused on questions such as what size the study area should be, what geological and hydrogeological investigations need to be conducted before embarking on the sampling events, which chemical parameters need to be included in the groundwater analyses, whether the drilling of dedicated boreholes are required to collect representative groundwater samples, and how to collect representative samples for these different chemical parameters.

In this paper, the proposed methodology is presented in the form of a flow diagram to be used to guide future groundwater baseline projects in South Africa.

Abstract

Groundwater modelling at the mine sites involves assumptions from the geological model, mining stages, parametrization, and fractures, among others. Modelling work mainly focuses on calibrating against historical measurements before operations (pre-mining) or afterwards (transient calibration). Calibration is carried out mainly with gradient-based algorithms. However, the majorlimitation is the number of model runs, since the number of parameters can easily reach hundreds or more. PEST has become the common tool for parameter estimation. The Jacobin calculation required for the Levenberg Marquardt algorithm requires several model runs. This, a limited factor for the calibration and, subsequently, uncertainty quantification. The next generation of PEST, named PESTPP, is gained popularity in the groundwater community. The great advantage of PESTPP,, compared to the classical PEST, is its new module, Iterative Ensemble Smoother (IES). PESTPP-IES covers both parameter estimation and uncertainty quantification in one goal. Its empirical formulation of the Jacobian matrix reduces the number of runs; thus, the numerical bottleneck can be significantly reduced. PESTPP-IES has been extensively tested in an open-pit mine at the geological complex conditions in the Peruvian Andes. The work involves the task of model simplification, e.g., from a regional model to a detailed local pit model, calibration and uncertainty quantification of pit dewatering volumes. Detailed model was kept calibrated based on hydraulic-head measurements, and dewatering volumes were predicted. All these consider transient changes in the mining plan within the same FEFLOW model. Results validate the methodology and practicability in mining applications.

Abstract

This paper presents data obtained from sampling and geochemical analysis of gold tailings and associated pool and drain water. Inverse geochemical modelling using PHREEQC indicated geochemical processes operating in the tailings between the pool and drains. These included pyrite oxidation and dissolution of various minerals identified in the tailings. The processes were incorporated into an ensemble geochemical model to calculate post-closure sulphate concentration in tailings seepage.

The ensemble model included a spreadsheet model to calculate oxygen flux at various depths in the tailings column, and a one-dimensional transport model in PHREEQC. The calculated oxygen flux was applied to each cell in the tailings column to determine the amount of sulphide oxidation and the release of acidity into the tailings pore water. The rate of vertical transport of pore water in the column was determined from physical characterisation of the tailings particle size and saturated hydraulic conductivity.

The model results indicate elevated sulphate concentrations and acidity moving as a front from the top of the column downwards. The modelled sulphate concentration of 1 500 to 1 900 mg/L 8-16 years after closure compared well with measurements of drain water quality at a tailings dam decommissioned approximately 16 years ago. This provided some credibility to the modelled result of 2 300 mg/L sulphate up to 50 years post-closure. However, the tailings moisture content, infiltration rate, and pyrite oxidation rate in the model were based on literature values, rather than site-specific measurements.

Abstract

Water management is a difficult and complex business requiring appropriate institutional arrangements as well as guidance and support from government, which is often unable to act effectively to address day-to-day water resource management (WRM) issues. Theoretically, water as a 'common pool resource' is best managed by users self-organised at a local level and within a basin framework. Water users and other stakeholders have detailed and up-to-date local knowledge as well as an interest in ensuring effective management to share water equitably between different users and to control pollution. This approach is supported by South Africa's National Water Act (NWA), which provides for the establishment of Catchment Management Agencies (CMAs) to perform a range of WRM activities within the framework of a National Water Resource Strategy (NWRS).
Hence, water resource management in general and conjunctive use in particular requires cross sector and cross level cooperative governance. Relevant institutions include the DWA at national and regional level, the CMA, if established, provincial departments that might impact on the water resources, water user associations, water services authorities, water services providers, water boards, and individual water users. These institutions are responsible for various activities and often require some level of inter- and intra-institutional cooperation. Ideally, multiple organisations, policies, legislation, plans, strategies and perspectives should be involved in water-related decision-making, which in turns creates complex leadership challenges. Globally, the lack of sustainable groundwater management can be ascribed to poor governance provisions. These include, but are not limited to, institutional arrangements and political will, including fragmented and overlapping jurisdictions and responsibilities, competing priorities, traditional approaches, rights and water pricing systems, diverging opinions, incomplete knowledge, data as well as uncoordinated information systems. Adding the poor operational and maintenance issues, decision-makers often view groundwater as an unreliable resource and are hesitant to make significant investments in groundwater infrastructure and capacity.
The recent Worldbank and WRC report on groundwater governance in South Africa revealed that the technical, legal, institutional and operational governance provisions were found to be reasonable at the national level but weak concerning cross-sector policy coordination. At the local level, basic technical provisions such as hydrogeological maps and aquifer delineation with classified typology are in place but other governance provisions such as institutional capacity, provisions to control groundwater abstraction and pollution, cross-sector policy coordination and the existence and implementation of groundwater management action plans are weak or non-existent.
It appears from this review that the major hindrances for sustainable groundwater governance and more so for integrated water resource management and conjunctive use scenarios are the discrepancy between groundwater and surface water provisions in the relevant legislation, associated guidelines and their implementation at regional and local, and the lack of skills and clear responsibilities for implementing water resource management actions at municipal level. This is demonstrated with several case studies.

Abstract

Groundwater levels in E33F quaternary catchment are at their lowest level ever. The impact of climatic variation and increasing abstraction were determined to be the main factor. There are 115 registered groundwater users in E33F and the monthly abstraction volumes are not being measured. There is a need to use land use activities as well as the population to estimate groundwater use. The main objective is to use non-groundwater monitoring data to estimate groundwater use in order to protect the aquifer and ecosystem in general in varying climatic condition. Land use activities information was used to estimate groundwater use in E33F quaternary catchment. The estimated groundwater use volumes were compared to allocated and measured volumes. For domestic groundwater use estimation, population data and an estimation 100 litre per person per day were used. The water requirements for the types of crops being cultivated together with the area (m2) were used to estimate groundwater use volumes for irrigation. The number and type of live stocks were used with the water requirements for each livestock type to estimate the groundwater use volumes. 96 % of groundwater users are using groundwater for irrigation purposes with 9 966 105 m3/a allocated for irrigation. Mining, industries, domestic and livestock are allocated 100 200 m3/a. The estimated groundwater use volume for irrigation is 30 960 000 m3/a, which is three times higher than the allocated volume. Groundwater use volume for domestic use is estimated to be 38 225 m3/a which is higher than the 31 000 m3/a allocated. The total estimated groundwater use volume in E33F is estimated to be 30 998 225 m3/a, which is three times higher than the allocated groundwater use volume of 10 066 305 m3/a. This estimation could be higher as only registered boreholes were used and estimations from mining, Industries and live stocks were excluded due to lack of data

Abstract

As we look at the legislation set out in the driving policies and its guiding frameworks, the need for able institutions to implement strategies that promise and deliver social growth and development, are highlighted. It is only possible to define an 'able institution' through its ability to fulfil its function and enable stakeholders to be part of the decision-making process. (Goldin, 2013) It is this relationship with the collection of stakeholders, in particular strategic water resource stakeholders, their linkages as well as the identification of specific stakeholder issues, that are critically reviewed. The recent Groundwater Strategy (2010) identified key strategic issues/themes. Each chapter listed a number of well thought out recommended actions that address specific challenges in each theme. It is the need for strategic direction (to put these strategies in place "plans into action") and to articulate the specific vision in the right context to the different stakeholders, (internal as well as external) that requires thinking. It is also the uptake of this information by publics (social action and intervention) and the impact of new learning that will need to be measured. This paper will present on a study where the groundwater sector and all its stakeholders are strategically examined to understand the process of communal thinking in the current environmental conditions. It would draw from current communication practices, style, strengths, sector experiences and trends and also reference specific and unique experiences as with the recent WRC Hydrogeological Heritage Overview: Pretoria project. {List only- not presented}

Abstract

For a long time, professionals regarded social media as a superficial, unprofessional platform where internet users would submerge themselves in a virtual world, detached from real-life issues. Slowly, the myths and stigmas surrounding the use of social media has faded as more and more professionals and scientists have realized that these social platforms could be positively exploited in a professional manner which could be beneficial. In a digital age where information at our fingertips is the norm, professionals should co-evolve and ensure that their work is just as accessible and appealing, without the unnecessary jargon. Currently, science is mostly restricted to a very particular audience and conveyed in one direction only. Using a social media platform such as Twitter-which limits messages to only 140 characters-challenges scientists to convey their work in a very concise manner using simpler terminology. Furthermore, it dismisses the usual one-way form of communication by opening dialogue with fellow Twitter users. At conferences, Twitter can serve as a useful tool for active engagement which will not only "break the ice" between delegates but also ensure that important information is communicated to a much wider audience than only those in attendance. This idea was tested at the 2014 Savanna Science Network Meeting held in Skukuza, Kruger National Park, where the hashtag #SSNM was used. More than 63% of the Twitter users who participated in the #SSNM hashtag were actually not present at the conference. These external "delegates" were interested individuals from five different continents and in different professions besides Science. This highlights how social media can be exploited at conferences to ensure that key messages are conveyed beyond the immediate audience at the event.

Abstract

Well-established engineered systems for depth-discrete monitoring in fractured rock boreholes (referred to as a Multilevel System or MLS) are commercially available and offer much diversity in design options, however, they are used infrequently in professional practice and have seen minimal use in groundwater research. MLSs provide information about hydraulic head and hydrochemistry from many different depths in a single borehole and, therefore, magnify greatly the knowledge value of each borehole. Conventional practice globally is devoted to standard monitoring wells, either alone as longer single screened wells or in clusters or nests with a few wells screened at different depth intervals. These are the mainstay of the groundwater science and engineering community and severely limit prospects for each borehole to provide the information needed to solve the complex problems typically posed by fractured rock. This paper outlines the nature and evolution of MLS technologies and points to recent literature showing how MLSs add important insights that cannot be obtained using conventional wells. Also, it reviews commercially available MLS technologies, which present a range of robust options with each system having different characteristics and niches depending on characterization and monitoring goals and site conditions. The paper also describes refined MLS criteria aimed at improving the cost effectiveness and expanding capabilities of MLSs, so as to improve their accessibility for high resolution data acquisition in the context of both groundwater system characterization and long-term monitoring.

Abstract

Vapour intrusion (VI) is recognized to drive human health risk at numerous sites that have been contaminated by petroleum products and other volatile contaminants. The risks related to VI are typically evaluated using direct measurement (vapour sampling) or modelling methods. ERM has developed a toolbox approach using a combination of exclusion distance criteria, direct measurement and modelling methods to assess risks and achieve closure. For direct measurement, samples of vapour are taken beneath the floor slab of buildings (sub-slab sampling) or from the air inside the buildings (indoor air sampling). Modelling methods are often used to estimate the partitioning of volatile contaminants from soil or groundwater sources into the vapour phase and the subsequent transport of vapours from the subsurface environment into habitable buildings. A limitation of modelling approaches is that they are designed to be conservative to be adequately protective of sensitive receptors. VI models also do not typically take into account the degradation of hydrocarbon vapours in the presence of oxygen, which has been found to be a significant process for petroleum hydrocarbons. The authors have compiled a dataset of petroleum vapour and groundwater results from over 50 petroleum release sites in southern Africa. These data were used to develop exclusion distance criteria for vapours emitted from contaminated groundwater sources (i.e. distance from the source at which sufficient aerobic attenuation has occurred for the VI risk to be negligible). A standard "lines of evidence" approach has been applied to the assessment of VI risk by firstly applying the exclusion distance criteria to sites with groundwater contaminant plumes beneath buildings, and if these are met, the sites are considered to have no unacceptable VI risk. Where exclusion screening criteria are not met, risk is estimated using modelling, and if a potential risk is predicted, then direct sub-slab measurements are taken to more accurately assess the risk. Lastly, where sub-slab assessment predicts a potential VI risk, indoor vapour measurement are taken to evaluate actual risk, taking into account interferences from other sources and background levels of contaminants. Mitigating measures can then be applied as appropriate. Various case studies will be presented including direct measurements at industrial and residential sites overlying contaminant plumes and modelling methods at residential properties adjacent to service station sites. A risk-based approach to the assessment of contaminated land provides a sustainable and cost effective methodology, and also avoids unnecessary remediation. The results show that VI risks can be adequately addressed with a toolbox approach using multiple lines of evidence.

Abstract

Mining site remnants are everlasting and impact the groundwater regime on a long term scale. An integrated approach to geoscience is necessary due to the complexity of nature and the unknown relationships that must be discovered to further the understanding of impacts on the natural environment. Furthermore, groundwater resources are negatively impacted by mining activities affecting the groundwater quality and quantity. Underground coal mining can be accompanied by roof failure events. This may change the matrix which subsequently alters the flow regime; leads to variations within the water chemistry, provided there is inter- aquifer connectivity; and alters the recharge rate. Dewatered mine voids are in direct contact with oxygen initiating oxidation reactions, depending on the geology of the specific site. A change in water chemistry was analyzed, and this coincides with a roof failure event as interpreted from water level measurements. Concentrations of Mg, Ca, and alkalinity indicate anomalous changes that are still in effect, five to six years after the majority of water levels had stabilized. The changes in the system coincides with and correlates to events of roof failure and different parameters. The latter changes are applied as extra tools when interpreting different site specific anthropogenic induced impacts on the system. Also within this study, constant rate pumping tests were conducted for the interest of the hydraulic properties, using three farming boreholes. The results put forward a range of 0.21 – 0.44L/s and 6.5 – 11.5m2 /d, for sustainable yield and transmissivity, respectively. Furthermore, it is recommended that a better understanding can be gained on system behaviors if chemistry correlations can be gathered through certain events causing specific systems to be in disequilibrium. It is also recommended that additional pumping tests will allow more insightful interpretation and delineation between the abovementioned chemical and water level changes. Finally, the combination of parameters during events can aid in deciding the most appropriate analytical models used for further analysis.

Abstract

When conducting water quality monitoring, questions arise on which water quality guidelines to use and where to apply them. For example, the use of South African Water Quality Guidelines (SAWQG) for Domestic usage compared to the use of the South African National Standards (SANS) for Potable Water Quality when monitoring drinking water quality. The World Heath Organization (WHO) published a set of water quality guidelines for drinking water which can also be used instead of SANS. Using various water quality guidelines to assess water quality can give different outcomes on the state of water quality of a particular site. For example, SANS water quality guidelines are less strict when compared to the SAWQG target values, however, SAWQG are comprised of different sets of standards for different usages. SAWQG distinguish between drinking water, livestock and irrigation, aquatic systems and industrial usage while SANS are only used for potable or bottled water. The International Finance Corporation (IFC) that is part of the World Bank Group published the Environmental, Health, and Safety (EHS) Guidelines for Environmental Wastewater and Ambient Water Quality, guidelines set specifically for wastewater and ambient water quality. Utilizing this poster, I will explain when to use which guidelines with different types of water samples. I will also discuss the stringent water use license limits applied at some sites compared to the national standards of South Africa.

Abstract

Arsenic is a common contaminant typically found in effluent from gold mine operations and copper smelters throughout the world. The geochemical behaviour of arsenic in contact with dolomite underlying an arsenic containing waste rock pile was investigated. The interaction between the arsenic and the dolomite is an important control in the subsequent transport of the arsenic in the dolomitic aquifer. Rocks with varying dolomite content were tested to investigate the interaction between the arsenic and dolomite. From the modelling and test results it was estimated that in the aquifer, between 60 - 90% of arsenic is present in the solid phase under oxidation conditions at >50 mV. At 50 to -25 mV about 40 - 60% of the arsenic is estimated to be present in the solid phase and below -25 mV about 0 - 10% of arsenic will be present in the solid phase. Although some arsenic is removed by the dolomite in the aquifer the arsenic would still be present above acceptable guidelines for drinking water. The arsenic in the solid phase will be in equilibrium with the aquifer water and could be remobilised 1) under more reducing conditions or 2) with a decrease in arsenic in the aquifer.

Abstract

South Africa utilizes coal for energy and chemical feedstock thereby generating millions of tons of ash every year. The ash is stockpiled in surface waste facilities where it poses a risk of leaching and contaminating groundwater. This study utilizes standard leaching tests, TLCP and SPLP, to evaluate and predict the mobility of different elements that leach from fly ash. Two different fly ash samples (Ash M and Ash T) were used in the study. A QEMSCAN analysis was also performed on the samples as well as the coal to determine the elementary and mineralogical compositions. Both Ash samples were generated from bituminous coals and had similar physical properties. Both ash samples were mixed respectively with the two different leachates one more acidic (Leachate A) the other more basic (Leachate B). Trace elements are present in ash in small amounts, but still at lower levels still pose threat to the environment and human health. Only three trace elements were found present in both ash samples. The detected trace elements in an increasing concentration order are: Manganese>Chromium>Copper. It appears the leaching behaviour of these trace elements is similar to the other metals, being insoluble at near neutral and alkaline pH range while dissolvable at low pH ranges. The results show that Leachate B was found to extract more material than Leachate A on a milligrams per gram of ash basis. The risk to groundwater contamination can be minimized by understanding the leaching dynamics and water retention of fly ash dumps as the results show.

Abstract

The intangible nature of groundwater provides challenges when trying to understand and quantify the role of groundwater in the hydrology of lakes and wetlands. This task is made even more difficult by the frequent absence of data. However, by adopting a scientific approach, it is possible to assess the hydrogeological contribution

Abstract

One-third of the world faces water insecurity, and freshwater resources in coastal regions are under enormous stress due to population growth, pollution, climate change and political conflicts. Meanwhile, several aquifers in coastal regions extending offshore remain unexplored. Interdisciplinary researchers from 33 countries joined their effort to understand better if and how offshore freshened groundwater (OFG) can be used as a source of potable water. This scientific network intends to 1) estimate where OFG is present and in which volumes, 2) delineate the most appropriate approaches to characterise it, and 3) investigate the legal implications of sustainable exploitation of the offshore extension of transboundary aquifers. Besides identifying the environmental impact of OFG pumping, the network will review existing policies for onshore aquifers to outline recommendations for policies, action plans, protocols and legislation for OFG exploitation at the local to international levels. Experienced and early-career scientists and stakeholders from diverse disciplines carry out these activities. The Action leads activities to foster cross-disciplinary and intersectoral collaboration and provides high-quality training and funded scientific exchange missions to develop a pool of experts to address future scientific, societal, and legal challenges related to OFG. This interaction will foster new ideas and concepts that will lead to OFG characterisation and utilisation breakthroughs, translate into future market applications, and deliver recommendations to support effective water resource management. The first exchange mission explored the Gela platform carbonate reservoir (Sicily), built a preliminary 3D geometrical model, and identified the location of freshened groundwater

Abstract

Water scarcity is a global challenge, particular in South Africa, which is a semi-arid country. Due to the continuing drought, appropriate groundwater management is of great importance. The use of groundwater has increased significantly over the years and has become a much more prominent augmentation component to the supply chain especially in rural communities. However, the approach used to develop groundwater resources, specifically in rural areas, can be improved in numinous ways to ensure drilling of successful boreholes that could meet water demands. A recent study done in the Thaba Nchu area focused on an adapted approach, which resulted in drilling successful boreholes that would be able to sustain their augmentation role in the long term. The adapted approach involves (i) a hydro-census that includes local knowledge and focused field observations, (ii) study of aerial photographs and geological maps on a regional scale, rather than on a village scale area, (iii) an optimised geophysical investigation to identify and map geological structures to drill production boreholes, (iv) conducting aquifer pump test to determine an optimum sustainable yield, (v) collecting water samples to determine if water quality is suitable for its specific use (vi) providing a monitoring program and abstraction schedule for each borehole. The adapted approach highlights the following improvements: (i) drilling of new production boreholes during times of bounty to allow for better time management on the project; (ii) including an experienced geohydrologist during planning phases, (iii) including a social component focussing on educating local communities on the importance of groundwater and introducing them to the concept of citizen's science, (iv) establishing a communication channel through which villagers can report any mechanical, electrical, quantity or quality issues for timeous intervention. Through applying these small changes to established components of development of groundwater resources, budgets and time management were optimised and additional communities could be added to the project without additional costs. This approach not only emphasised ways to improve the awareness and potential of groundwater resources, but also affects the economical-, social- and environmental welfare in rural communities.

Abstract

Underground coal gasification (UCG) is a chemical process that converts coal in-situ into a gaseous product at elevated pressures and temperatures. Underground coal gasification produces an underground cavity which may be partially filled with gas, ash, unburned coal and other hydrocarbons. In this study we assessed the stratification down the length of the boreholes. This was done by comparing the Electrical Conductivity (EC) profile of background boreholes to the verification borehole that were drilled after gasification was complete. Stratification was seen in all boreholes including the cavity borehole. The EC levels were lower in the cavity which may be due to the dilution factor induced by injecting surface water during quenching of the gasifier. The thermal gradient shows a steady increase in temperature with depth with higher temperatures measured in the verification boreholes. This increase in temperature may suggest that heat is still being retained in the cavity which is expected. This study serves as the preliminary investigation on the stratification of temperature and EC and will be proceeded with in depth surveys that covers all the groundwater monitoring wells that monitor different aquifers identified on site proceed.

Abstract

PMWIN5.3 has been one of the most commonly used software for groundwater modeling because of its free source and the adoption of popular core program MODFLOW. However, the fixed formats required for data input and lack of GIS data support have posted big challenges for groundwater modelers who are dealing with large areas with complicated hydrogeological conditions. In South Africa, most geological and hydrogeological data have been captured and stored in GIS format during various national research projects such as WR2005, NGA and etc. Therefore, a proper linkage between PMWIN and ArcGIS is expected to do the preprocessing for modeling in PMWIN. Visual Basic for Application (VBA) embedded in ArcGIS 9.3 was used to develop the linkage. Based on the conceptualization of the study area, the model dimension, discretization and many value setting processes can be easily carried out in ArcGIS other than directly in PMWIN. Then the grid specification file and other input files can be exported as the PMWIN-compatible files. The functions of move, rotation, refinement, sub-model, deleting and inserting row(s) or column(s) of the model have also been developed to avoid the inconvenience aroused from model modification. The linkage can be used with a higher version of PMWIN or ArcGIS. It has been applied to several gold fields in the Witwatersrand gold basin to simulate the groundwater flow and mass transportation for various conditions and scenarios. One of the applications will be presented in this paper. It has been proved that the linkage is efficient and easy to use. {List only- not presented}

Abstract

Mt. Fuji is the iconic centrepiece of a large, tectonically active volcanic watershed (100 km2 ), which plays a vital role in supplying safe drinking water to millions of people through groundwater and numerous freshwater springs. Situated at the top of the sole known continental triple-trench junction, the Fuji watershed experiences significant tectonic instability and pictures complex geology. Recently, the conventional understanding of Mt. Fuji catchment being conceptually simple, laminar groundwater flow system with three isolated aquifers was challenged: the combined use of noble gases, vanadium, and microbial eDNA as measured in different waters around Fuji revealed the presence of substantial deep groundwater water upwelling along Japan’s tectonically most active fault system, the Fujikawa Kako Fault Zone [1]. These findings call for even deeper investigations of the hydrogeology and the mixing dynamics within large-scale volcanic watersheds, typically characterized by complex geologies and extensive networks of fractures and faults. In our current study, we approach these questions by integrating existing and emerging methodologies, such as continuous, high-resolution monitoring of dissolved gases (GE-MIMS [2]) and microbes [3], eDNA, trace elements, and integrated 3-D hydrogeological modelling [4]. The collected tracer time series and hydraulic and seismic observations are used to develop an integrated SW-GW flow model of the Mt. Fuji watershed. Climate change projections will further inform predictive modelling and facilitate the design of resilient and sustainable water resource management strategies in tectonically active volcanic regions

Abstract

This study intent to share the legal and institutional analysis of the UNESCO IHP project "Groundwater Resources Governance in Transboundary Aquifers" (GGRETA) project for the Stampriet Transboundary aquifer. The Intergovernmental Council (IGC) of the UNESCO International Hydrological Programme (IHP) at its 20th Session requested the UNESCO-IHP to continue the Study and Assessment of Transboundary Aquifers and Groundwater Resources and encouraged UNESCO Member States to cooperate on the study of their transboundary aquifers, with the support of the IHP. The GGRETA project includes three case studies: the Trifinio aquifer in Central America, the Pretashkent aquifer in central Asia and the Stampriet aquifer in southern Africa. This study focuses on the Stampriet Transboundary Aquifer System that straddles the border between Botswana, Namibia and South Africa. The Stampriet system is an important strategic resource for the three countries. In Namibia the aquifer is the main source of water supply for agricultural development and urban centers in the region, in Botswana the aquifer supplies settlements and livestock while in South Africa the aquifer supplies livestock ranches and a game reserve. The project methodology is based on UNESCO's Shared Aquifer Resources Management (ISARM) guidelines and their multidisciplinary approach to transboundary aquifers governance and management, addressing hydrogeological, socio-economic, legal, institutional and environmental aspects. The GGRETA builds recognition of the shared nature of the resource, and mutual trust through joint fact finding and science based analysis and diagnostics. This began with collection and processing of legal and institutional data at the national level using a standardized set of variables developed by the International Groundwater Resources Assessment Center (IGRAC). This was followed by harmonization of the national data using common classifications, reference systems, language, formats and derive indicators from the variables. The harmonized data provided the basis for an integrated assessment of the Stampriet transboundary aquifer. The data assisted the case study countries to set priorities for further collaborative work on the aquifer and to reach consensus on the scope and content of multicountry consultation mechanism aimed at improving the sustainable management of the aquifer. The project also includes training for national representatives in international law applied to transboundary aquifers and methodology for improving inter-country cooperation. This methodology has been developed in the framework of UNESCO's Potential Conflict Cooperation Potential (PCCP) program. The on-going study also includes consultation with stakeholders to provide feedback on proposals for multicountry cooperation mechanisms. It is anticipated that upon completion of the study, a joint governance model shall have been drawn amongst the three countries sharing the aquifer to ensure a mutual resource management.

Abstract

The hydrogeological setting of a proposed mine site can significantly influence the viability of the mining venture. The management of groundwater inflows, costs of the dewatering technology, construction and maintenance of storage facilities, discharge strategies and anticipated environmental impacts are vital factors for consideration. It is fundamental to assess the hydrogeological setting at an early stage of the mine life cycle and should involve the collection of sufficient hydrogeological data, conceptualisation of the hydrogeological setting and an assessment of planned mine operations and anticipated impacts. Ambient hydrogeological conditions at the deposit area may be identified by conducting a hydrocensus and utilising existing ore exploration drilling data. Information from the hydrocensus and ore exploration drilling can provide valuable preliminary data on groundwater risks, dewatering and available groundwater resources. Potential groundwater/surface water interactions and receptors sensitive to environmental impacts can be identified during a hydrocensus. Similarly, water strikes and fracture density recorded during exploration drilling provide valuable insight to the subterranean environment. It is also possible to obtain aquifer hydraulic properties through packer testing of exploration boreholes. Geochemical test work on exploration borehole-cores could provide valuable information regarding contamination risks from ore deposit and waste material storage. The installation of piezometers within available and accessible exploration holes that extend below the regional groundwater level can pioneer the collection of monitoring data crucial for consideration during the mine life cycle and provide an understanding of the interaction between hydrogeological units and recharge characteristics. Ultimately, mine operations and associated potential impacts on the surrounding groundwater environment can be simulated with the application of numerical hydrogeological flow and contaminant transport models. The numerical models can simulate the regional groundwater flow system and complexities of the mine environment, the accuracy of which is influenced by the type, spatial and temporal distribution of the data collected. It is accordingly suggested that the collection of hydrogeological data and information during the exploration phase would facilitate the timely conceptualisation of potential groundwater risks and effective planning of hydrogeological investigations required during upcoming phases while assisting in the budget optimisation of these future studies.

Abstract

This paper was presented at the GWD Central Branch Symposium, Potchefstroom in 2012

Numerical modelling of hydrogeological systems has progressed significantly with the evolution of technology and the development of a greater understanding of hydrogeology and the underlying mathematical principles. Hydrogeological modelling software can now include complex geological layers and models as well as allow the pinching out of geological features and layers. The effects of a complex geology on the hydraulic parameters determined by numerical modelling is investigated by means of the DHI-WASY FEFLOW and Aranz Geo Leapfrog modelling software packages.

The Campus Test Site (CTS) at the University of the Free State in Bloemfontein, South Africa was selected as the locale to be modelled. Being one of the most studied aquifers in the world, the CTS has had multiple research projects performed on it and as a result ample information is available to construct a hydrogeological model with a high complexity. The CTS consists primarily of stacked fluvial channel deposits of the Lower Beaufort Group, with the main waterstrike located on a bedding-plane fracture in the main sandstone aquifer.

The investigation was performed by creating three distinct hydrogeological models of the CTS, the first consists entirely of simplified geological strata modelled in FEFLOW by means of average layer thicknessand does not include the pinching out of any geological layers. The second model was created to be acopy of the first, however the bedding-plane fracture can pinch out where it is known to not occur. The third and final model consisted of a complex geological model created in Leapfrog Geo which was subsequently exported to FEFLOW for hydrogeological modelling.

Abstract

Water has been recognized and acknowledged as a fundamental natural resource that sustains environmental diversity, social and economic development (Liu et al., 2017; Fisher et al., 2017). With increasing populations, climate change and limited monitoring networks for both ground and surface water, freshwater resources are becoming difficult to assess due to rapid changes in water supply and uses. Several efforts have been devoted towards the monitoring and management of water resources and discovery of alternative sources of freshwater. One of the more recent efforts is using gravity information to track changes in water storage on the earth's surface. The Gravity Recovery and Climate Experiment (GRACE) mission (https://www.nasa.gov/mission_pages/Grace/index.html) holds great potential for assessing our water resources in areas with little monitoring data. The increasing interest in the use of GRACE as a water resource information and monitoring tool, is due to its cost effectiveness and user-friendly system which affords a broad understanding of the world we live in and its processes, specifically in water resource management and hydrological modelling. South Africa's National Water Act (NWA) of 1998 highlights the importance of the sustainable development of water resources. However, it is difficult to sustainably manage South Africa's groundwater resources due to the difficultly in measuring and understanding our complex aquifers. The challenges in establishing sustainable monitoring of groundwater resources and its Reserve, are due to insufficient knowledge about the contribution that groundwater makes to surface water, and methods which reliably monitor groundwater resources. The GRACE is a joint satellite mission by the Deutschen Zentrum fur Luftund Raumfahrt (DLR) in Germany and the United States National Aeronautics and Space Administration (NASA). The satellite was launched on 17 March 2002 and provides monthly temporal differences of earth's gravity field and its mean gravity field (Schmidt et al., 2008). It can afford insights into the location of groundwater resources, and their changes. GRACE can however, only determine the change in total water storage and therefore information on other components of the water balance are required to isolate the groundwater component. Therefore, the integrated Pitman Model is ideal to be applied together with GRACE and the Model can isolate surface water, soil moisture and groundwater into various components. Many studies have evaluated GRACE-derived groundwater storage changes as a response to drought (Famiglietti et al. 2011; Scanlon et al., 2012), while Thomas et al. (2017b) evaluated a groundwater drought index based on GRACE observations in an effort to understand and identify groundwater drought. Typically, GRACE is applied at scales of 150 000 km2, however Thomas et al., (2017) has developed a recent method that allows for the application of his GRACE derived Groundwater Drought Index (GGDI) at smaller scales. This study applies Thomas et al. 2017 GGDI in South Africa to the Crocodile, Sedgefield and Doring catchments, in hopes to to evaluate drought characterisation using data from GRACE satellites, focusing on the total water storage deficits to characterise groundwater drought occurrence.

Abstract

Industrial Management Facilities represent a hazard to the down gradient surface water and groundwater environment. The assessment of the risks such facilities pose to the water environment is an important issue and certain compliance standards are set by regulators, particularly when the potential for an impact on the water environment has been identified. This paper will aim to describe how the contamination was conceptualized, estimated, limitations and how it is technically not feasible to establish one limit or compliance value of known contamination in different aquifers.

Abstract

Understanding the hydrogeochemical processes that govern groundwater quality is important for sustainable management of the water resource. A study with the objective of identifying the hydrogeochemical processes and their relation with existing quality of groundwater was carried processes in the shallow aquifer of the Lubumbashi river basin. The study approach includes conventional graphical plots and multivariate analysis of the hydrochemical data to define the geochemical evaluation of aquifer system based on the ionic constituents, water types, hydrochemical facies and groundwater factors quality control. Water presents a spatial variability of chemical facies (HCO3- - Ca2+ - Mg2+, Cl- - Na+ + K+, Cl- - Ca2+ - Mg2+ , HCO3- - Na+ + K+ ) which is in relation to their interaction with the geological formation of the basin. The results suggest that different natural hydrogeochemical processes like simple dissolution, mixing, and ion exchange are the key factors. Limited reverse ion exchange has been noticed at few locations of the study. At most, factor analyses substantiate the findings of conventional graphical plots and provide greater confidence in data-interpretation. {List only- not presented}

Abstract

Inadequate characterization of contaminated sites often leads to the development of poorly constructed conceptual site models and consequently, the design and implementation of inappropriate risk management strategies. As a result, the required remedial objectives are not achieved or are inefficient in addressing the identified risks. Unfortunately, it is all too common to find remedial intervention strategies that run for lengthy periods of time at great cost while generating little environmental benefit due to inadequate characterization of site conditions. High resolution site characterization (HRSC) can provide the necessary level of information to allow for development of rigorous conceptual site models, which can be used to develop and implement appropriate risk management solutions for environmental problems. At the outset, the HRSC approach generally has comparatively higher costs than traditional state-of-the-practice assessment methods. However, the project lifecycle costs can be substantially reduced due to development of optimal risk management strategies. In developing countries where there is a lack of legislation relating to soil and groundwater contamination or, a lack of enforcement of legislation which is present, the long-term liabilities related to contaminated sites are often not immediately apparent to the parties responsible for the sites. This often creates a reticence to employ HRSC techniques due to their increased cost, especially when much of the technology must be imported on a project specific basis from either Europe or the United States. The Authors provide information from several case studies conducted in South Africa where HRSC techniques have been employed to gain a greater understanding of subsurface conditions. Techniques employed have included surface-based geophysical techniques such as electrical resistivity tomography (ERT) and multi-channel analysis of seismic waves (MASW), passive soil gas surveys, deployment of Flexible Underground Technologies (FLUTe?) liners, diamond core drilling, fluid electrical conductivity profiling, downhole geophysical logging tools, the Waterloo Advanced Profiling System (APS), and the use of field laboratories. Several of the techniques required importing equipment and personnel from Europe or the US, and in several case studies, were a first to be employed in South Africa, or the continent of Africa for that matter. The Authors present data obtained using the HRSC techniques from the case studies and elaborate on how the information obtained was used to drive effective decision making in terms of managing long term environmental risks at the various sites, which has been positively embraced by local clients. The authors also highlight key challenges in conducting HRSC investigations in an emerging market context.

Abstract

In the following study, the soil and groundwater regime of the Rietvlei wetland near Cape Town are characterised. This has been done by means of logging the subsurface material during the construction of 8 shallow wells, complimented with field observations, and surveying the dug wells. The water stemming from these wells was sampled and analysed for Oxygen 18 and Deterium. Downhole salinity logs of the wells were also undertaken and rainfall samples were analysed for the aforementioned stable isotopes. Results indicate a distinct relationship between elevation and soil structure. Through the use of the water table method, it was found that the relationship between elevation and soil moisture had a direct impact on spatially distributed groundwater recharge on an event basis. Furthermore, higher salinities were found with depth in groundwater in the same wells which had higher recharge values. Isotopic results indicate that groundwater all stems from rainfall, with the exception of Well 8 is influenced by the river due to its proximity to the surface water body. The various water chemistries and soil profiles have a direct impact on the type of flora and its distribution throughout the study area. This study managed to conceptualize the relationship between groundwater, soil profiles and the various plant types surviving in the Rietvlei wetland. Future studies can focus on computer based approaches in order to predict how changes in groundwater characteristics caused by natural or anthropogenic factors would affect other ecohydrological processes within the wetland. These findings can be incorporated in decision making processes concerning groundwater management.

Abstract

Groundwater is an essential source of water worldwide. The increased reliance on groundwater has caused the mining of many aquifers, a situation compounded by climate change, rising surface-air temperature, declining precipitation, and reduced groundwater recharge in many regions. The global annual intensity of groundwater use rose from 128 to 155 m3 per capita between 1950 (when the world population was 2.5 billion people) and 2021 (when the population was 7.9 billion people) and is herein projected to rise to 178 m3 per capita by 2050 as the world’s population is projected to increase (to 9.7 billion people by 2050) throughout the rest of the 21st century and beyond. This study projects a global annual groundwater depletion of 1,008 km3 by 2050, representing a 256% rise from the estimated 2010 depletion. This projection is most likely a lower bound of the actual groundwater depletion that would be realized considering environmental flows, historical trends of global economic growth, and climate-change impacts, thus being a harbinger of rising environmental degradation (e.g., land subsidence, seawater intrusion, streamflow reduction, aridification). Measures to achieve groundwater sustainability are herein identified.

Abstract

Estimating groundwater recharge response from rainfall remains a major challenge especially in arid and semi-arid areas where recharge is difficult to quantify because of uncertainties of hydraulic parameters and lack of historical data. In this study, Chloride Mass Balance (CMB) method and Extended model for Aquifer Recharge and soil moisture Transport through unsaturated Hardrock (EARTH) model were used to estimate groundwater recharge rates. Groundwater chemistry data was acquired from the Department of Water and Sanitation (DWS) and Global Project Management consultants, while groundwater samples were collected to fill-in the identified gaps. These were sent to Council for Geoscience laboratory for geochemical analysis. Rainfall samples were also collected and sent for geochemical analysis. An average value of rainfall chloride concentration, average groundwater chloride concentration and mean annual precipitation (MAP) were used to estimate recharge rate at a regional scale. Local scale recharge was also calculated using chloride concentration at each borehole. The results were integrated in ArcGIS software to develop a recharge distribution map of the entire area. For EARTH model, long term rainfall and groundwater levels data were acquired from the South Africa Weather Services and DWS, respectively. Soil samples were collected at selected sites and analysed. These were used to determine representative values of specific yield to use on EARTH model. 60% of the groundwater levels data for 5 boreholes was used for model calibration while the remaining 40% was used for model validation. The model performance was evaluated using coefficient of determination (R2), correlation coefficient (R), Root Mean Square Error (RMSE) and Mean square error (MSE). Regional recharge rates of 12.1 mm/a (equivalent to 1.84% of 656 mm/a MAP) and 30.1 mm/a (equivalent to 4.6% MAP) were calculated using rainfall chloride concentrations of 0.36 and 0.9 mg/L, respectively. The estimated local recharge rates ranged from 0.9-30.2 mm/a (0.14 - 4.6%) and 2 - 75 mm/a (0.3 - 11.4%) using chloride concentration of 0.9 and 0.36 mg/L, respectively. The average recharge rate estimated using EARTH model is 6.12% of the MAP (40.1 mm/a). CMB results were found to fall within the same range with those obtained in other studies within the vicinity of the study area. The results of EARTH model and CMB method were comparable. The computed R2, R, RMSE and MSE ranged from 0.47-0.87, 0.68-0.94, 0.04-0.34, 0.16-3.16, and 0.50-0.79, 0.68-0.89, 0.07-0.68, 0.15-8.78 for calibration and validation, respectively. This showed reasonable and acceptable model performance. The study found that there is poor response of groundwater levels during rainy season which is likely to be due to lack of preferential flows between surface water and groundwater systems. This has resulted in poor relationship between estimated and observed groundwater levels during rainfall season.

Key words: ArcGIS, CMB, EARTH, Groundwater recharge, rainfall

Abstract

There are various software packages used by hydrogeologists for a variety of purposes ranging from project management, database management, data interpretation, conceptual and numerical modelling and decision making. Software is either commercial (produced for sale) or open source (freely available to anyone and for any purpose).

The objective of this paper is to promote open source software that can be used by the hydrogeological community to reduce expenses, enhance productivity and maximise efficiency.

Free software was previously associated as being inferior in quality in the corporate world. Companies often use commercial software at a hefty price, but little do they know that open source is often equal to, or superior to their commercial counterparts. The source code of open source software can freely be modified and enhanced by anybody. Open source software is a prominent example of open collaboration as it is developed by users for the user community. Companies using open source software do not need to worry about licensing and do not require anti-piracy measures such as product activation or a serial number.

However, the decision of adopting open source software should not just be taken just on the basis of the low-cost involved. It should entail a detailed analysis and understanding of the requirements at stake, before switching to open source to achieve the full benefits it offers and to understand what the down side is. There are plenty of open source products that can be used by hydrogeologists. The packages considered in this article are those that are frequently used by the author and do not necessarily mean that they are the best available. Software gets updated or abandoned with time and what is considered powerful today may be obsolete in a few years.

Some of the well-known open source packages recommended for hydrogeologists include: OpenLibre for project management, Blender 3D or Sketchup for 3D conceptual modelling, QGIS for GIS mapping and database management, SAGA GIS for interpolation and ModelMuse for numerical modelling (comprising of Modflow for finite difference, Sutra for finite element and Phast for geochemical modelling). In addition, there are a number of free software packages developed by the USGS, various universities and consultants across the globe that can be used for aquifer test interpretation, borehole logging and time-series data analysis. A saving of more than R250,000 can be made per hydrogeologist by utilising such open source packages, while maintaining high quality work that is traditionally completed using commercial software.

Abstract

A groundwater assessment was conducted to identify and predict the contamination and transport properties of a groundwater system. The motivation for the study was the rising concern of a farm owner about the deteriorating water quality of the aquifer system. An investigation of the surface and groundwater quality indicated that two fertilizer dumpsites were the sources of pollution. Water analyses revealed elevated concentrations of Ca, Mg, K, F, NO3, SO4, Mn and NH4 within boreholes near the pollution sources. The NH4 and NO3 concentrations were exceptionally high: 11 941 mg/L and 12 689 mg/L, respectively. These high concentrations were the direct result of the dumping of fertilizer. The rise in these concentrations may also have been catalysed by the nitrogen cycle and the presence of the Nitrosomonas bacterium species. Due to the high solubility of NO3, and because soils are largely unable to retain anions, NO3 may enter groundwater with ease, and could migrate over large distances from the source. Elevated NO3 in groundwater is a concern for drinking water because it can interfere with blood-oxygen levels in infants and cause methemoglobinemia (blue-baby syndrome). A geophysical study was undertaken within the area of investigation to gain insight on the underlying geological structures. The survey indicated preferential flow paths within the aquifer system along which rapid transport of contaminant is likely to occur.
Key words: aquifer system, groundwater quality analyses, fertilizer, nitrogen cycle, Nitrosomonas species, geophysics.

Abstract

The expectation that during yield tests, a borehole will react within the expected framework of the existing numerical models, is often not met within real-world scenarios. This is mainly due to the observation that the Theis solution for confined aquifers, Neuman solution for unconfined aquifer and Barker Generalised Radial Flow Model for hydraulic tests in fractured rocks all include idealised assumptions regarding the physical aspects of a hypothetical. In order to interpret the data from a yield test these methods, along with the Flow Characteristic method for sustainable yield estimates, are commonly used. However, as these assumptions are not always met, the analysis is usually focused on time periods within the test that approximate these solutions. In some cases, the extent to which these assumptions are not met can produce drawdown data that is not well described by the usual analytical models used to analyse this data. This study addresses some of the shortcomings experienced during testing in non-ideal aquifers, as well as briefly describing some tests where small budgets, short deadlines, a lack of information and/or unforeseen circumstances resulted in similar challenges to analyses. This study does not present new solutions to drawdown data analyses, but rather discusses how the mentioned solutions were used during testing to accommodate for the shortcomings experienced.

Abstract

Until 1998 groundwater was managed separately from surface water and was seen as a private resource. The National Water Act of 1998 (Act 36 of 1998) (NWA) was forward thinking in that it saw groundwater as an integrated part of the water resource system and as a common resource to be managed by the Department of Water and Sanitation (DWS) as custodian. Various tools had been provided to manage the water resources equitably, sustainably and efficiently. A limited understanding of groundwater and the prevalence to revert to engineering principles when managing water resources had led to an Act that is mostly written with surface water in mind. The tools and principles that had been tested for surface water was used directly for groundwater without considering the practicalities in applying and enforcing the NWA. This did not provide too many problems, as groundwater was not considered a viable, sustainable water resource, and the use of groundwater was mostly limited to private use for garden irrigation, in agriculture for irrigation and for bulk supply in a number of small towns where surface water was not available. This has changed drastically during the recent drought that affected the whole country, but especially the Western Cape. Groundwater was suddenly seen as the solution to the problem of water availability. The problem was that the understanding of groundwater has not increase sufficiently over the years, and water resources management is still skewed to hydrology principles that apply to surface water. Groundwater sustainability is at the heart of the questions of scale and measurements. The Department has been flooded by the large number of water use licence applications that have been submitted by municipalities, industries and agriculture as a result of the drought. This article will look at groundwater resource assessment and allocation methodology in a South African context.

Abstract

Resources required for groundwater sampling includes but not limited to pumping equipment, trained manpower and technical resources specific to the sampling function. Bearing these expenses in mind, choosing a laboratory for testing the water samples collected should be a carefully considered purchase. Choosing a testing facility that cannot deliver an efficient, reliable and technically sound service could render the sampling futile.

Water samples submitted to a laboratory for testing are received from third party sources more than ninety percent (90%) of the time and sampling techniques and sample integrity cannot be verified by the laboratory. However, the validity, reliability and integrity of the laboratory testing are within the control of the testing facility. These aspects of a laboratory are usually controlled within a quality management system where established policies and procedures form the basis of such a system. This system maintains a foundation for technical competence and customer service at the laboratory.

There are numerous testing facilities available to Consultants requiring chemical and microbiological groundwater testing, each with varying levels of integrity and technical ability. It is imperative to maintain confidence in the validity of results of analyses from a laboratory and this assurance can be understood through an examination of a facility's management system.

An established quality management system would comprise a policy statement, associated technical methods and technical and administrative procedures. This system would be formally documented and audited as part of the on-going laboratory's management system. In some instances, laboratories formalise this into an accreditation of the laboratory to an international standard, such as ISO 17025:2005.

The assurance that the results of analyses from any laboratory are of sound technical integrity would depend on factors such as
- personnel training,
- accommodation and environmental conditions under which the tests are carried out,
- validation of the methodology applied (including the uncertainty of measurement),
- the calibration and maintenance of the equipment used,
- understanding the traceability of and measurement undertaken,
- handling and preservation of the sample on receipt and while in the laboratory.

Each of these factors plays a critical role in the integrity of results of analyses and should be interrogated when trying to understand the reliability and competence of the laboratory of choice.{List only- not presented}

Abstract

Model calibration and scenario evaluations of 2D and 3D groundwater simulations are often computationally expensive due to dense meshes and the high number of iterations required before finding acceptable results. Furthermore, due to the diversity of modelling scenarios, a standardised presentation of modelling results to a general audience is complicated by different levels of technical expertise.

Reducing computational time
In this presentation we look briefly at the use of Reduced Order Models (ROM's), which is one of the recent developments in groundwater modelling. The method allows significant speed-up times in model calibration and scenario evaluation studies. In saturated flow for example, these approaches show speed-up times of >1000 when compared to full models created with Finite Element of Finite Difference methods. These methods are demonstrated to a case study in the Table Mountain Group, in which we show a simplified parameter calibration and scenario evaluation study.

Standardising presentation
In order to present the results to as wide an audience as possible, the use of a web-browser as a GUI is proposed, where the web-page is coupled to a geo-spatial database and data is presented in a spatial and numeric format. The use of the spatial database manager PostgreSQL with PostGIS is proposed. Through a browser interface, users can run modelling scenarios using the ROM, which is evaluated in near real-time. Following the evaluation of the model, we show how PostGIS can spatially present data on a base-map such as google maps. In keeping with the current trends in online map customisation, viewers can interactively choose to overlay the base-map with a data-type (such as pressure or hydraulic head contours or flow direction) that is most intuitive for their level of familiarity with the data.

Conclusion
In using advanced modelling techniques and a simplified browser based presentation of results, high-level decisions in water resource management can be significantly accelerated with the use of interactive scenario evaluations. Furthermore, by reaching a broader audience, public participation will be significantly enhanced.

Abstract

Groundwater monitoring, especially from the end users' point of view, is often considered an add-on, or even unnecessary overhead cost to developing a borehole. Simply measuring groundwater level over time can however tell a story on seasonal rainfall fluctuations as well as the response of an aquifer to the removal of an abstracted volume of water. In this case an artesian borehole of high yield and exceptional quality was drilled in an area of minimal groundwater use because of known poor quality and low yields. The borehole was drilled in two stages with the deeper drilling resulting in significantly higher yields and the artesian flow. Sediment free water, deep artesian water strikes and a lack of flow around the casing led to the conclusion that capping at surface would control the visible artesian flow of 4 L/s. A slight drop in pressure indicated that subsurface leakage may however be occurring. Neighbouring boreholes with automated water level monitoring provided data showing a correlation of drop in water level to the second deeper drilling event. The artesian borehole was yield tested and this too was visible in the water level monitoring data. Hereafter it became apparent that each activity performed at the artesian borehole had an impact on the monitoring boreholes, and that a subsurface leak was causing local depressurization of a semi-confined to confined aquifer. An initial attempt to save the artesian borehole was unsuccessful, resulting in the necessary blocking and abandonment of a high yielding, superior quality borehole. If monitoring data was not available the local drop in water level would never have been noticed with disastrous effect and no evidence for the cause. Simple water level monitoring has averted this and kept neighbourly relations and ground water levels intact

Abstract

Monitored Natural Attenuation (MNA) refers to the monitoring of naturally occurring physical, chemical and biological processes. Three lines of evidence are commonly used to evaluate if MNA is occurring, and this paper focusses on the second line of evidence: The geochemical indicators of naturally occurring degradation processes and the site-specific estimation of attenuation rates.

The MNA geochemical indicators include the microbial electron acceptors (e.g. dissolved oxygen, nitrate and sulphate) and the metabolic by-products (manganese (II), iron (II) and methane). In addition, redox and alkalinity are important groundwater indicators. So as to properly assess the geochemical trends a groundwater monitoring well network tailored to assessing and defining the contaminant plume is required.

The expressed assimilative capacity (EAC) is used to estimate the capacity of the aquifer to degrade benzene, toluene, ethylbenzene and xylene (BTEX compounds) using the concentrations of geochemical indicators. Using the EAC, the groundwater flow through a perpendicular cross-section of the source area, and the source mass, the life of the contaminant source can be made.

A practical example of the performance monitoring of MNA using geochemical parameters is described for a retail service station in KwaZulu-Natal, which has groundwater impacted by a petroleum hydrocarbon plume. This includes a description of the monitoring well network, the geochemical measurements, the calculation of the EAC, and the estimated life of the contaminant source.

Abstract

The Transboundary Groundwater Resilience (TGR) Network-of-Networks project brings together researchers from multiple countries to address the challenges of groundwater scarcity and continuing depletion. Improving groundwater resilience through international research collaborations and engaging professionals from hydrology, social science, data science, and related fields is a crucial strategy enabling better decision-making at the transboundary level. As a component of the underlying data infrastructure, the TGR project applies visual analytics and graph-theoretical approaches to explore the international academic network of transboundary groundwater research. This enables the identification of research clusters around specific topic areas within transboundary groundwater research, understanding how the network evolved over the years, and finding partners with matching or complementary research interests. Novel online software for analysing co-authorship networks, built on the online SuAVE (Survey Analysis via Visual Exploration, suave.sdsc.edu) visual analytics platform, will be demonstrated. The application uses OpenAlex, a new open-access bibliographic data source, to extract publications that mention transboundary aquifers or transboundary groundwater and automatically tag them with groundwater-specific keywords and names of studied aquifers. The analytics platform includes a series of data views and maps to help the user view the entire academic landscape of transboundary groundwater research, compute network fragmentation characteristics, focus on individual clusters or authors, view individual researchers’ profiles and publications, and determine their centrality and network role using betweenness, eigenvector centrality, key player fragmentation, and other network measures. This information helps guide the project’s data-driven international networking, making it more comprehensive and efficient.

Abstract

A large number of groundwater investigations have been carried out in the Western Cape over the last decade or so. Most of them were related to water supply options for individuals, agriculture, businesses, industries, government departments and municipalities. Some of these developments have confirmed what we already knew about the groundwater characteristics and aquifers of the Western Cape, while others provided us with surprises - surprises so significant that we may have to re-write what we thought we knew. This paper will not be able to cover all the interventions and groundwater studies that have been done. Two case studies linked to the major geological structure in the Western Cape, namely the Colenso Fault (also known as the Franschhoek-Saldanha Fault), will therefore be used as an illustration of the lessons that were learnt by comparing them with our historical understanding of the associated groundwater characteristics. It will also show that there is a need for updated groundwater maps on smaller scale and a reassessment of the aquifers status.

Abstract

The main purpose of this paper is to present a case study where a water balance concept was applied to describe the expected groundwater safe yield on a sub-catchment scale. The balance considers effective recharge based on local hydrogeology and land cover types, basic human needs, groundwater contribution to baseflow, existing abstraction and evaporation. Data is derived from public datasets, including the WRC 90 Water Resources of South Africa 2012 Study, 2013-2014 South African (SA) National Land Cover and Groundwater Resource Assessment Ver. 2 (GRAII) datasets. The result is an attempt to guide a new groundwater user regarding the volume of groundwater that can be abstracted sustainably over the long-term.